PTFE Tortilla Press Belts

Tortilla press belt is specially designed for continuous tortilla press machine. Tortilla press belt material is wrapped around the hot platen to compress the dough on a tortilla press belt to create the tortilla crust. This PTFE coating material is oil resistant and abrasion resistant, has brown, blue and Maroon colors available.

PTFE Tortilla Fiberglass Belts

Hot pressing methods in the tortilla industry enables flour tortillas to be produced at the highest speeds. Tortilla belts from Deer Hunter is made of PTFE coated fiberglass fabric in brown color, the material is formulate to be more oil-proof to resists fat ingression. Different kinds of joint types can be customized such as oblique joint, overlap joint and castellated joint, indexing tabs can be installed on both edges of the belt, allow for the belt to be electronically indexed, controlling the belt to start and stop.

Material Properties

Durable tortilla press belts and dependable service are what you need. At Deer Hunter, that’s exactly what you get. Thanks to our engineering staff, we pride ourselves in offering the best, most advanced, tortilla press belt materials on the market.

1. Non-combustible - self extinguishing
2. Easy cleaning (nothing bonds permanently)
3. Chemical corrosion and moisture resistance
4. High release from sticky materials 'non-stick'
5. Outstanding electrical and dielectric properties
6. Lightweight & energy efficient for economical operation
7. Ultra-violet, infra-red, microwave and radio frequency resistance
8. Chemical inertness: affected only by a few rare substances at very high temperatures

Downloading Technical Data Sheet

TDS - Standard PTFE Coated Glassfibre Fabric For Tortilla Belt (DH025AJ)

TDS - Premium PTFE Coated Glassfibre Fabric For Tortilla Belt (DH025AJ-P)

Key Points Help You Order

Tortilla press belt is made of PTFE coated fabric tortilla grade. Our Tortilla press belt has been offered to supply the best non stick abrasion resistance for tortilla production. We were able to develop a tortilla belt that left minimal markings on the tortillas, resulting in a minimization of tortillas having a mark imprinted from the belt seam, reducing waste and helping our customers reach production goals. With our strict quality system, we are able to deliver consistent, high quality materials for food applications.

Here are essential factors to consider, drawn from our extensive experience, to guide you.

1: Colors

Brown, Maroon, or Blue color? Make your choice.

Brown Color

Maroon Color

Blue Color

2: Use and Care

Once you have your Tortilla Press Belts, it’s important to understand how to correctly maintain them. Below you will find critical information pertaining to the se and care of the new belts.

General Handling Guidelines

Avoid placing hard objects on the belt.
Do not drag the belt over rough surfaces.
Refrain from stacking items when the machine is idle.
Keep the belt flat during installation.
Do not fold or crease, as this can cause tearing.
Avoid scraping or scratching the surface.

How to Clean

Rinse belt with water and apply detergent (FDA approved).
Clean only with a soft sponge.
Rinse detergent off the belt.
Dry the belt with an absorbent cloth.
Never use abrasive cleaning pads.
Never use hard plastic, wood, or metal to scrape the belt.
Do not fully submerse the belt in a large sink or tank.

3: Width and Length

Non-standard belt sizes are available. Please contact your Sales Representative for more information.

4: Belts Joints (Splice Options)

Proper belt running is only possible if we choose a suitable joint. We must take into account the following factors:

Oblique Joint

Most common and heat-sealed at high temperatures.

Castellated Joint

A castellated joint is made by creating interlocking loops from PTFE coated aramid / Kevlar materials. The two ends can then be connected together with a metal or peek pin. This method is easy to install on the machine.

Frequently Asked Questions

How do I choose between PTFE Cloth, Kevlar Cloth, and PTFE Film for edge sealing?

Choose PTFE Cloth for durability, Kevlar Cloth for strength in extreme conditions, and PTFE Film for smooth edges. We’ll guide you to the best option.

Can these conveyor belts withstand high-temperature processes?

Definitely. They're built for high-heat processes like baking and drying, maintaining performance under continuous high temperatures.

What benefits do Food Grade Teflon PTFE Mesh Conveyor Belts offer for my production line?

These belts boost productivity with durability, non-stick surfaces, and heat resistance for consistent food quality. They enhance heat transfer and airflow, ideal for drying, baking, and freezing.

Are these conveyor belts safe for direct food contact?

Yes. They're made from food-grade Teflon PTFE, meeting FDA food processing standards.

How should I clean and maintain the conveyor belt?

Use water and mild detergents for cleaning. For stubborn residues, opt for a soft-bristled brush. Regular care extends lifespan and ensures performance.

How can we get in touch

Why we're different...

Top quality tortilla press belts with top quality customer service. What else could you want?